Front Panel Leds And Buttons - HP ProLiant SL390s G7 4U User Manual

*By default, the HP NC543i 2-port 4x QDR IB/10Gb Adapter is configured as a dual-port 10 GigE device. If the
InfiniBand Enablement kit is installed, then the onboard QSFP port functions as InfiniBand, and the device operates as a
1-port 10 GigE (SFP+) and 1-port QDR InfiniBand (QSFP).

Front panel LEDs and buttons

Item Description
Power On/Standby button
1
and system power LED
SFP+/10 GigE activity LED
2
SFP+/10 GigE link LED
3
Health LED
4
QSFP/InfiniBand activity LED Amber—Logical link established
5
QSFP/InfiniBand port link
6
LED
NIC 2 speed LED
7
NIC 2 activity LED
8
NIC 1/iLO 3 activity LED
9
NIC 1/iLO 3 speed LED
10
Status
Green—System on
Amber—System shut down, but power still applied.
Off—Power cord is not attached, or power supply has failed.
Flashing green—Activity exists
Off—No activity exists, or no connection exists.
Green—Linking
Off—No connection exists.
Green—Normal
Flashing amber—System degraded
Flashing red—System critical
Flashing amber—Activity exists.
Off—No activity exists, or no connection exists.
Green—Physical link negotiated.
Off—No connection exists.
Green—LAN connection using a GbE link
Amber—LAN connection using a 10 Mbps/100 Mbps link
Off—No LAN connection exists.
Flashing green—Network data activity exists.
Off—No network data activity exists, or no network connection
exists.
Flashing green—Network data activity exists.
Off—No network data activity exists, or no network connection
exists.
Green—LAN connection using a GbE link
Amber—LAN connection using a 10 Mbps/100 Mbps link
Component identification 7