Pcie Riser Board Option - HP ProLiant SL390s G7 4U User Manual

Install the PCI riser cage.
7.
Connect all necessary internal cabling to the expansion board. For more information on these cabling
8.
requirements, see the documentation that ships with the option.
Install the server into the chassis
9.
Connect the peripheral devices to the server.
10.
Power up the server
11.

PCIe riser board option

CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
To install the component:
Power down the server (on page 17).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server from the chassis
3.
Remove the PCI riser cage.
4.
("Installing the server into the
("Powering up and configuring the
For proper cooling, do not operate the server without the access panel, baffles,
("Removing the server from the
chassis" on page 22).
server" on page 24).
chassis" on page 17).
Hardware options installation 35