Processor Options - HP ProLiant SL390s G7 4U User Manual

Rotate the drive carrier handle down.
6.
Install the server into the chassis
7.
Connect the peripheral devices to the server.
8.
Power up the server
9.

Processor options

WARNING:
internal system components to cool before touching them.
CAUTION:
configurations must contain processors with the same part number.
CAUTION:
processor and a heatsink or a processor socket cover and a heatsink blank.
IMPORTANT:
To install the component:
Power down the server (on page 17).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server from the chassis
3.
CAUTION:
seating during installation, leading to hardware damage.
("Installing the server into the
("Powering up and configuring the
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent possible server malfunction and damage to the equipment, multiprocessor
To prevent possible server overheating, always populate processor socket 2 with a
Processor socket 1 must be populated at all times or the server does not function.
("Removing the server from the
Failure to completely open the processor locking lever prevents the processor from
chassis" on page 22).
server" on page 24).
chassis" on page 17).
Hardware options installation 27