Placing Plastic Cards In The Card Slot; Specifications For Plastic Cards For Scanning From The Card Slot; Types Of Cards That Require Attention - Epson DS-360W User Manual

User's Guide
5. Slide the edge guides to fit the edge of the envelope making sure there are no gaps between the envelope and
the edge guides. Otherwise, the envelope may be fed skewed.
Note:
To scan envelopes, we recommend selecting the appropriate rotation angle or Auto in Rotate on the Main Settings tab
in Epson Scan 2 before scanning. See the Epson Scan 2 help for details.
Related Information
"Basic Scanning" on page 52
&
"Advanced Scanning" on page 63
&

Placing Plastic Cards in the Card Slot

Specifications for Plastic Cards for Scanning from the Card Slot

These are the specifications for plastic cards that you can load into the scanner from the card slot.
Note:
❏ You can scan plastic cards from the card slot at the front. You cannot scan from the ADF.
❏ Although you cannot scan card from ADF, you can leave the ADF as the Document Source setting in Epson Scan 2.
Size Card Type
ISO781A ID-1 Type Without embossing
54.0×85.6 mm
(2.1×3.3 in.)

Types of Cards that Require Attention

The following types of cards may not be successfully scanned.
❏ ISO781A ID-1 Type plastic cards with emboss (the thickness should be 1.24 mm (0.05 in.) or less)
Specifications of Originals and Placing Originals
Thickness
1.0 mm (0.04 in.) or
less
48
Loading Capacity Loading Direction
1 card Vertical (Portrait)