Siemens c62 Service Manual page 26

Gsm phase 2+, triple-band - egsm 900 / gsm 1800 / gsm 1900, gprs
Hide thumbs Also See for c62:
Table of Contents

Advertisement

S I E M E N S
C62 Level 2 Service Manual
Flash Programmer
Open the Flash Programmer and the following window will appear.
FLASH
Flashing process
The flash button is disabled if the Flash Programmer options are not correctly set. Basic setting
for flashing process is:
1. Select the hardware version "auto-detect" from the list.
2. Select the software release from the list. Latest is the biggest number of the software
versions.
3. Select the language package "same as current" from the list. None means that no
language package is selected.
4. Select the customization package "None" from the list.
5. Press "Flash". (Window shown below appears)
Copyright © Siemens Pte Ltd.
All Rights Reserved
ICM MP CCQ SLI RHQ
P T E L T D
25 of 47
C62 Level 2 manual V1.1
Internal Use Only

Advertisement

Table of Contents
loading

Table of Contents