System Environment Setup - Hitachi PXR Service Manual

2.2 System environment setup

With respect to the
password protection, refer
to "2.1 setting of service
personnel maintenance
mode".
Note
-The setting with respect to the system environment of the IJ printer is performed.
Ink type
(1)
Nozzle size
(3)
Excitation frequency
(5)
Ambient temperature upper/lower limit
(7)
The memory card with the IJP system is necessary to change the nozzle size.
-
This setting is performed in the IJ printer "stop" state.
-
1 Press System environment setup at the second page of the service
maintenance work screen.
When the previous menu and the next menu are not displayed in the
maintenance work menu, set to the service personnel maintenance mode by the
password protection.
Maintenance menu
System
environment setup
Download
2 Set values using the numeric, Decrement, or Increment key.
System env. setup
Ink type
Cable length
Nozzle diameter
Ink temperature correction
Excitation freq.
Excitation curve
Ambient temp. upper lim.
Ambient temp. lower lim.
To change the excitation frequency setting, use the
increment/decrement button.
1 2 3
Note: The nozzle diameter of PXR-H is setting needlessness.
(55 µm is set automatically.)
When the ink type is set, an initial value is automatically set.
With respect to the initial value, refer to the next page. With respect to
full details about the excitation curve, refer to the attached figure 8.6.
3 After the completion of the setting, when Back is pressed, the screen
returns to the maintenance menu.
Cable length
(2)
Ink temperature correction
(4)
Excitation curve
(6)
2011.07.07 12:45 Status:XXXXXXXXX
Adjustment/
operational checkout
Unit information
2005.07.07 12:45 Status:XXXXXXXXX
[ 0011] ( JP-K67
[ 1 ] (1: 4 m )
[ 2 ] (1: 40 2: 65 3:100 µm)
[ 1 ] ( 0:disable 1:enable
[ 68.9 ] ( kHz ; standard value:68.9)
[ 00 ] (standard value: 0 )
o
[ 45 ] ( C；40-50 : standard value:45)
o
[ 00 ] ( C ; 0- 5 ; standard value: 0)
4 5 6 7 8
2-4
Start
down
up
Comm
Manual
Solenoid valve/ On/Off
pump test
Prev.
menu menu
)
)
9 0
Decre- Incre-
Back
ment ment
Shut
Next