Important Error Messages - Panasonic X400 User Manual

Important error messages

These are some of the most important error messages which may be displayed:
Failed!
SIM blocked!
Insert SIM
Invalid SIM
Function unavailable!
PIN2 invalidated!
Storage full Message
rejected!
or
SIM message storage full
Message rejected!
Too many characters!
This message may not be
stored
Verification failure!
Auto redial list full!
Roaming in the selected area is not allowed.
Roaming with the selected network is not allowed.
The network has detected an authentication failure because your SIM is not
registered with that network – contact Vodafone.
The SIM is blocked because the PIN unblocking key (PUK) has been entered
incorrectly ten times – contact Vodafone.
The phone has detected a problem with the SIM – switch the phone off and then
back on; if the message is still displayed contact Vodafone.
The SIM has failed one or more of the SIM personalisation checks – contact
Vodafone.
The selected feature is either not supported by the SIM or is not available with
the current subscription – contact Vodafone.
The PIN2 is blocked permanently because the wrong PUK2 has been entered
ten times, services controlled by PIN2 cannot be used – contact Vodafone.
A message has been received but the message store is full – to receive
messages, delete some of the currently stored messages.
The edited or newly created contact number is too long for the SIM.
The message area is full. Your messages cannot be stored until some of the
currently stored messages are deleted.
On changing the PIN/PIN2, verification of the new code is incorrect – retry
changing the PIN/PIN2 with correct verification.
Redial list of unsuccessfully dialled numbers is full – switch the phone off and
then on again.
Troubleshooting
89