Drive Chain Slider; Front And Rear Suspension Inspection - Honda CB Hornet 2016 Owner's Manual

7. Adjust the drive chain (page 57) and
rear brake pedal free play (page 16).

DRIVE CHAIN SLIDER

Refer to the Safety Precautions on page 42.
Remove the left side cover (page 33)
Check the chain slider (1) for wear.
The chain slider must be replaced if it is
worn to the wear limit cutout (2). For
replacement, visit your Honda dealer.
(1)
(1) Chain slider ¼pS u LykbMj½
(2) Wear limit cutout
60
(2)
¼fo;j fyfeV dVvkmV½
FRONT AND REAR SUSPENSION
INSPECTION
Refer to the Safety Precautions on page 42.
1. Check the front fork assembly by locking
the front brake and pumping the fork up
and down vigorously. Suspension action
should be smooth and there must be no
oil leakage.
2. Swingarm bearings should be checked
by pushing hard against the side of the
rear wheel while the vehicle is on the
center stand. Free play indicates worn
bearings.
3. Carefully inspect all front and rear
suspension fasteners for tightness.
Honda Motorcycle & Scooter India Pvt. Ltd.