HP 9845B/C CE Handbook page 18

2-4
9845B/C Environmental, Installation, and Preventive Maintenance Requirements
The sliding lock handles! - on each leg of the display - should be pulled out (in the open
position).
Working on one leg at a time, tilt the display slightly to the right and gUide the right leg into
place. Pull the display to the left toward the other leg, and position the left leg into place.
The back of both display legs should now be resting on the top cover of the mainframe. (If not,
check both sliding lock handles - they should be pulled out.) There should be a gap (about %
inch) between the mainframe top cover and the front of the display legs. If the display does not
appear to be sitting properly on the mainframe, repeat the previous step.
v."
1 Ignore the references to the sliding lock handles if the 9845C is not equipped with the sliding lock mechanism