HP 9845B/C CE Handbook page 120

10-6
9845B/C
Mainframe References
158
Improper image specifier or nesting image specifiers more than 4 levels deep.
1 59 Numeric data was not received for numeric enter list item.
160
Repetition of input character more than 32 768 times.
161
Attempted to create CONVERT table or EOl sequence for source or destina-
tion variable which is locally defined in a subprogram.
162
Attempted to delete a nonexistent CONVERT table or EOl sequence.
163
1/0
error, such as interface card not present, device timeout, interface or
peripheral failure (Interface FLAG line=O.), stop key pressed or improper in-
terface card type.
16
a
Transfer type specified is incorrect type for interface card.
165
A FHS or DMA transfer with no format specifies a count that exceeds th size of
the variable, or an image specifier indicates more characters than will fit in the
specified variable.
166
A NOFORMAT FHS or DMA type transfer does not start on an odd numbered
character position, such as A$[3].
167
Interface status error, TRl Character or an EOI was received on an HP-IB
Interface before ENTER list or image speCification was satisfied.
168 - 183
Reserved for future use.
18a
Improper argument for OCTAL or DECIMAL function or assembled location.
185
Break Table overflow.
1
86
Undefined BASIC label or subprogram name used in IBREAK statement.
187
Attempt to write into protected memory; or, attempt to execute instruction not
in ICOM region.
188
label used in an assembled location not found.
1 89 Doubly-defined entry point or routine.
190
Missing ICOM statement.
1 9 1 Module not found.
192
Errors in assembly.
1
93
Attempt to move or delete module containing an active interrupt service
routine.
19
a
IOUMP speCification too large. Resulting dump would be more than 32 768
elements.
1 95 Routine not found.
1
96
Unsatisfied externals.
197
Missing COM statement.
1 98 BASIC's common area does not correspond to assembly module require-
ments.
198 Insufficient number of BASIC COM items.
200 - 206
Reserved for future use.
207
Binaries not allowed in lOAD SUB file. Do lOAD, SAVE, SCRATCH A, GET
and STORE on the file to get rid of binaries. However, the loaded program
may not run after the binaries are removed.
208
Volume not mounted. Mount it and execute a VOLUME DEVICES ARE state-
ment.