HP 9845B/C CE Handbook page 118

10·4
9845B/C
Mainframe References
53
Improper file name. A file name can have 1-6 characters and can't contain a
colon, quote mark, NULL or CHR$(255).
54
Duplicate file name. Choose another name or PURGE the old one.
55
Directory overflow. There is a maximum number of files that a mass storage
medium can hold. A file will have to be removed to add another.
56 File name is undefined. Check the spelling.
57 Mass Storage ROM is missing. Check to see that the ROM is installed properly.
58
Improper file type. Use LOAD for PROG files, ASSIGN and GET on DATA files
and LOAD KEY for KEYS files.
59
Physical or logical end-of-file found. Attempting to READ# or PRINT# past
the end of the file. Compare the data list to the file size.
60 Physical or logical end-of-record found in random mode. Compare the data list
to the record size.
6 1
Defined record size is too small for data item. You can either PURGE and
RE-CREATE the file with longer records or regroup the data being recorded.
62 File is protected or wrong protect code specified. Check to see that the protect
code is included and spelled properly.
63
The number of physical records is greater than 32 767. That's the limit; use
something smaller.
64
Medium overflow (out of user storage space). A file can't be set up because
there isn't enough space. Use another medium or purge unwanted files.
65 Incorrect data type. You can't use GET on a DATA file that doesn't contain a
program. Use TYP to find out what kind of data the computer is trying to be
read.
66 Excessive rejected tracks during a mass storage initialization. The medium
can't be initialized. If the medium is a flexible disk, use a different one. If the
medium is a hard disc, call your HP Sales and Service Office for assistance, to
determine whether there has been a hardware failure.
67
Mass storage parameter less than or equal to
O.
Check values of variables.
Record numbers, record lengths and number of defined records must be posi-
tive numbers.
68 Invalid line number in GET or LINK operation. Check line numbers. May be
trying to LINK to file that doesn't contain a program.
69 Format switch on the disc off. Turn it on.
70 Not a disc interface. Check mass storage unit specifier.
7 1 Disc interface power off. Turn it on.
72 Incorrect controller address, controller power off, or disc time out. Check mass
storage unit specifier; make sure controller is on.
73
Incorrect device type in mass storage unit specifer.
74 Drive missing or power off.
75 Disc system error, type P.
76
Incorrect unit code in mass storage unit specifier.
77 Disc system error, type IP.
1 See the Mass Storage Techniques Manual.