HP 9845B/C CE Handbook page 121

9845B/C
Mainframe References 10-7
208 Operation not allowed on tape. Only the BKUP file used in DBBACKUP and
DBRECOVER is allowed on tape.
2
1 0
Bad status array. It must be defined as integer precision with;;:,: 10 elements.
211
213
2111
Check spelling and current size.
Improper data base specified or data base not open. Improper name, or per-
forming data base operation with invalid name.
Data set not found. Check set name or number and make sure it is on the
volume specified in the schema.
Reserved for future use.
Data base requires creation. Perform a DBCREATE.
2 1 5 - 2 1
7
Reserved for future use.
2 1
8
Volume name not part of data base. Check spelling.
218 Out of available memory for a DBOPEN, DBBACKUP or DBRECOVER. Out
of read/write memory if executed from main program. Out of special area if
executed from subprogram, so perform the DBOPEN in the main program.
220 Improper or illegal use of maintenance word. Check spelling and leading or
trailing blanks.
22 1 Data set not created.
222 Reserved for future use.
223 Improper backup file. In DBRECOVER, backup file has incorrect information
in header or no primary DBBACKUP/RECOVER currently in progress (for
secondary operation).
22
1I
Incomplete backup file. More than one volume in backup; probably mounted
in the wrong order. Start the recovery over.
225 Improper utility version number in root file. Rerun Schema Processor to gener-
ate new root file.
228 Corrupt data base - must purge and redefine. Purge root file and run Schema
Processor.
227 Corrupt data base - all sets require erasure.
228 Data sets cannot be re-created without root file.
228 Operation not allowed while DBOPEN current. Perform a DBCLOSE mode 1.
230 Improper set list in DBBACKUP, DBCREATE, DBERASE, DBPURGE or dupli-
cate sets in the set list.
23 1 - 232 Reserved for future use.
233 Required data set root file not mounted. Mount it and perform a VOLUME
DEVICES ARE.
2311
235
238
Referenced line not a PACKFMT statement. Make sure line identifier is correct
and that
it
references a PACKFMT statement.
Reserved for future use.
Insufficient length in a PACK statement, or insufficient current length in an
UNPACK. Insufficient length in a DBBACKUP or DB RECOVER statement.
237 List length> 32767 in PACK or UNPACK. Array in PACKFMT too large.
Make sure it is the correct variable; redimension if necessary.
238 Numeric conversion error. Improper real number found. Check PACKFMT to
make sure a REAL or SHORT variable, not INTEGER is being unpacked.
I