Table of Contents
Advertisement
Lock keypad
Keypad can be locked to prevent accidental key press.
When the keypad is locked, you can still answer an incoming call by pressing
During the call, the keypad is active. When the call is ended, the keypad will be locked again.
1.
In idle mode, long press
2.
Press the UNLOCK key to unlock the keypad. Press OK to confirm.
Paging
You can locate the handsets by using this feature.
Press
on the base.
All handsets registered to the base will produce the paging tone for 30 seconds and the screen displays
PAGING.
To stop paging :
Press the STOP softkey or
Note : A handset will not play the paging melody if it is powered off or not in idle mode. However, all
the other handsets will still ring.
CallerID first ring suppression
If you have subscribed for CallerID service, your phone will suppress the first ring before the CID. After
resetting, first ring suppression will be deactivated. After the first call, your phone will automatically detect if
CID service is subscribed. If CID service is detected, your phone will start suppressing the first ring after the
first call.
Note : Once first ring suppression is activated, the first ring before CID will be suppressed even after
you have unsubscribed the CID service. If you have unsubscribed the CID service and do not wish to
have the first ring suppressed, please power recycle the base.
Switch on/off the handset
To switch off your phone, long press
To switch on the power of your phone, press
The handset should be automatically turned on.
Other features
. When locked,
will appear on the display.
on one of the handsets or press
while in idle mode.
or return the handset to the charger.
.
on the base again.
EN
25
Hide quick links:
Advertisement
Table of Contents
