What’s in the box Power supply for Base station Handset base station Battery door 2 AAA rechargeable Line cord batteries Quick Start Guide Warranty card User Guide The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
Page 3
Connect Connect the base station 1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station. Connect the power Connect the line...
Page 4
Enjoy Make a call Enter the phone number and press Press and enter the phone number. Answer a call When the phone rings, press key. End a call Press key. Adjust earpiece volume during a call Press to select from Volume 1 Volume Set the ring melody...
Page 5
Switch the handset On/Off Press and hold key for 5 seconds to switch off the handset in stand-by mode. Short press key to switch on the handset again. Keypad lock/unlock Press and hold key for 2 seconds to lock and unlock keypad in stand-by mode. Paging 1.
Check your subscription with your network operator • • (CLI) service does not work Need help? User Manual Refer to the User Manual that is supplied with your CD530/535. Online help www.p4c.philips.com 3111 285 26381 Get user manuals: See SafeManuals.com...