First Ring; Auto Clock; Register Additional Handsets - Philips D700 Extended User Documentation

» The setting is saved.

First ring

If you have subscribed to the caller ID service
with your service provider, your phone can
cancel the first ring before the caller ID is
displayed on the screen. After the phone is
reset, it can detect automatically if there is a
caller subscription and start to cancel the first
ring. You can change this setting to suit your
preference. This feature only applies to models
with first ring support.
Turn the first ring on/off
1
Select [Menu] >
press [OK] to confirm.
2
Select [On]/[Off], press [OK] to confirm.
» The setting is saved.
Note
•
To reset the first ring status, go to the reset menu (see
'Restore default settings' on page 43).

Auto clock

Note
•
This service is network dependent.
•
Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
Select [Menu] >
press [OK] to confirm.
2
Select [On]/[Off] . Press [OK].
> [First ring], then
> [Auto clock], then
» The setting is saved. .

Register additional handsets

You can register additional handsets to the base
station. The base station can register up to 4
handsets.
Auto registration
Extra handsets of the same model can be auto-
registered. Place the unregistered handset on
the base station.
» The handset detects the base station
and registers automatically.
» Registration is complete in less
than two minutes. The base station
automatically assigns a handset number
to the handset.
Manual registration/Pairing
If auto registration fails or if you register a
handset of a different model, register your
handset manually to the base station.
1
Select [Menu] >
press [OK] to confirm.
2
Press and hold
5 seconds.
Note
•
For models with an answering machine, you hear a
confirmation beep.
3
Enter the system PIN/passcode. Press
[Clear] to make corrections.
4
Press [OK] to confirm the PIN/passcode.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
> [Register], then
on the base station for
EN 41