Restore Handset Default Settings - Philips Cell Phone User Manual

PIN code setting
A PIN (personal identification number) code is required to access the registration, delete handset, and reset
mode.
The factory-preset code is "0000". You can change it to a unique code of your own. A PIN code can be up to
8 digits long.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Enter the current PIN
5. Enter the new PIN
6. Repeat the new PIN
7. Press OK to save settings.
Note : You will hear a reject tone and wrong PIN is displayed if the current PIN is incorrect or the new
PIN is not repeated correctly. Follow steps 3 to 7 and try again.

Restore handset default settings

You can reset the display, sounds, and other settings of your phone. Refer to the chapter "Default settings",
page 38.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Enter the PIN code
5. Press OK to confirm.
Other features
to select SYSTEM, and then press OK.
to select CHANGE PIN. Press OK.
and press OK.
and press OK.
and press OK to confirm.
to select SYSTEM, and then press OK.
to select RESET. Press OK.
(by default PIN is "0000") and press OK to confirm.
EN
33