Restart; Reset Factory Settings - Siemens optiPoint 410 Administrator's Manual

Administration
Step by Step
50 50 50 50

Restart

Making changes in the administration area Æ page 49.
ADG
Press keys simultaneously.
or
CEN
Press keys simultaneously.
K
Enter the Administrator password
(default: 123456 Æ page 92).
During start-up the LEDs momentarily illuminate in suc-
cession.

Reset factory settings

The resetting can lead to the failure of all the
functions of the optiPoint 410. Ensure that you
have all the necessary information for start up
Æ page 15.
For standard values, see Æ page 95.
Disconnect the red Western plug of the power supply
unit cable (Pos. 3 Æ page 10) or, if "Power over LAN",
disconnect the LAN cable (Pos. 1 Æ page 10) from the
optiPoint 410 for a few seconds.
J
Lift handset.
BHI
Press keys simultaneously.
KU T T
Enter the reset password (124816).
N
Confirm the entry.
P
Replace the handset.
optiPoint 410 entry