Table of Contents
Advertisement
12. AUTO CALIBRATION
1. Connect as Fig 6-2(RS232 serial cable is connected between COM port of PC and MON port of TEST JIG,
in general)
2. Set the Power Supply 4.0V
rd
th
3. Set the 3
, 4
of DIP SW ON state always
4. Press the Phone power key, if the Remote ON is used, 1
12.4 Procedure
1.
Copy the file to C:\Cm_Gsm_Multi
2.
Copy the files of((Windows XXX)MFCD DLL, vsflex7l_ocx_regist to C:\Cm_Gsm_Multi\dll,ocx
3.
Select MFCD DLL of your computer OS
4.
Click on "vsflex7l_ocx_regist"
5.
Click on "Multi_HK reg"
6.
Connect as Fig 11-2 (RS232 serial cable is connected between COM port of PC, in general.)
. Run HK_40exe to start calibration.
7
8
Click " Logic Operation" of "SETTING" menu bar
LGE Internal Use Only
st
ON state
- 142 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Advertisement
Table of Contents
