11. STAND ALONE TEST
11.1 Introduction
This manual explains how to examine the status of RX and TX of the model.
A. Tx Test
TX test - this is to see if the transmitter of the phones is activating normally.
B. Rx Test
RX test - this is to see if the receiver of the phones is activating normally.
11.2 Setting Method
①
②
③
1. Set COM Port
2. Check PC Bau Rate
3. Confirm EEPROM & Delta file prefix name
4. Click "Update Info" for communicating Phone and Test-Program
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 135 -
11. STAND ALONE TEST
LGE Internal Use Only