Engineering Mode - LG GX200 Service Manual

10.Engineering Mode

1.1. Enter and Exit Engineering Mode
In idle screen, enter the Factory Mode menu by typing "*2945#*#". Like normal menu
operations, press Left-Soft-Key (LSK) "Back" to the previous screen or End key to go back
to the idle screen.
1.2. Version
Version info summary: Software version number, software codebase branch, build time
info.
MCU SW: Software version number
Melody: melody version
Serial No. :Serial number.
BB chip: Base band chip info.
1.3. Network Setting
1.3.1. Network Info
This function is for engineers to monitor the status of the protocol stack and interactions
with the network. Use LSK ok to toggle the value of a selected item. After selection of
items to monitor is complete,press RSK Back. If any settings are changed,a screen
appears with "Update Parameter?". Pressing LSK Yes saves the new values to the
protocol stack;Pressing RSK NO discards all changes.These settings are not stored in
NVRAM;thus the settings are lost if the handset is powered off.
Item Function Selection
Network RR Cell Sel
Info.
RR Ch Dscr
RR Ctrl Chan
RR RACH Ctrl
RR LAI Info
RR Radio Link
RR Meas Rep
CC Chan Info
CC Call Info
CA List Info
PLMN Info
GPRS Info
Si2Q/Mi Info
TBF Status
Block Info
Band Selelct
1.3.2.
Value Description
On/Off Radio Resource cell selection
information
On/Off Radio Resource channel
description information
On/Off Radio Resource control channel
information
On/Off Radio RACH control channel
information
On/Off Radio Resource LAI information
On/Off Radio Resource radio link
information
On/Off Radio Resource measurement
report information
On/Off Call Control Channel information
On/Off Call Control Call information
On/Off CA List information
On/Off PLMN information
On/Off GPRS information
On/Off Si2Q/Mi information
On/Off TBF Status
On/Off Block information
-160-