Engineering Mode - LG CG225 Service Manual

9. ENGINEERING MODE

Engineering mode is designed to allow a service man/engineer to view and test the basic functions
provided by a handset. The key sequence for switching the engineering mode on is "2945#*# "Select.
Pressing END will switch back to non-engineering mode operation. Use Up and Down key to select a
menu and press 'select' key to progress the test. Pressing 'back key will switch back to the original test
menu.
[1] All auto test
[2] Baseband test
[2-1] LED
[2-1-1] BACKLIGHT
[2-1-1-1] MAIN LCD ON/OFF
[2-1-1-2] KEYPAD ON/OFF
[2-2] LCD
[2-2-1] LCD AUTO
[2-2-2] LCD COLOR
[2-3] Camera
[2-3-1] Preview
[2-3-2] Settings
[2-4] FONT
[2-4-1] FONT 810
[2-4-2] FONT 810i
[2-4-3] FONT 816
[2-4-4] FONT 816i
[2-4-5] FONT 816b
2-4-6] FONT 1018
[2-4-7] FONT 1019
[2-4-8] FONT 1320
[2-5] ALERT
[2-5-1] VIBRATOR
[2-5-2] RING
[2-5-3] EFFECT SOUND
[2-5-4] IMELODY SOUND
[2-5-5] EMS SOUND
9. ENGINEERING MODE
[2-6] SERIAL PORT
[2-6-1] MODEM
[2-7] BATTERY INFO1
[2-8] AUDIO GAIN
[2-8-1] RECEIVER
[2-8-2] EAR MIC
[2-8-3] LOUD SPEAKER
[2-8-4] HANDSFREE
[2-8-5] DEFAULT VALUE
[2-8-6] DAI TEST
[2-8-7] LOOPBACK TEST
[3] CG225 VERS
[4] ENG MODE
[4-1] CELL ENVIRON
[4-2] LOCATION INFO
[4-3] LAYER1 INFO
[4-4] SELECTION DE BANDE
[4-5] CMU200 BLER
[5] CALL TIMER
[6] FACTORY DEFAULT
[7] FACTORY RESULT
[8] IM Connection
[9] IM Client ID
- 111-