Stand Alone Test; Introduction; Setting Method - LG -A258 Service Manual

10. STAND ALONE TEST

10.1 Introduction

This manual explains how to examine the status of RX and TX of the model.
A. Tx Test
TX test - this is to see if the transmitter of the phones is activating normally.
B. Rx Test
RX test - this is to see if the receiver of the phones is activating normally.

10.2 Setting Method

1. Set COM Port
2. Check PC Baud Rate
3. Confirm EEPROM & Delta file prefix name, and then click "OK".
LGE Internal Use Only - 13 - Copyright © 011 LG Electronics. Inc. All right reserved.
10. STAND ALONE TEST
Only for training and service purposes