Viewing Version Information; Network Settings - HP G3 KVM User Manual

When connected to a rack mount console that supports LDS, the KVM Console Switch receives the rack
ID, console ID and part number, the rack U position, and location information. This information appears in
the KVM Console Switch OBWI under Unit View>Appliance>Properties>Location.
When location information is available, the KVM Console Switch uses the rack ID and console U position
as its own when queried by the iPDU and reports its location to be in the back of the rack. This information
is only accurate when viewed in the iPDU OBWI if the KVM Console Switch is mounted directly behind the
console in the shared U position.
The LDS/PDS information query and update time intervals vary between the iPDU and the KVM Console
Switch, as well as the time intervals for query and update between the KVM Console Switch and the
console. As such, the time that it takes for the information to show up in the KVM Console Switch and
iPDU varies.

Viewing version information

The Appliance Version Information screen displays version information of the current application, boot,
build, hardware, UART, and the video ASIC versions. The screen is read-only.

Network settings

Only administrators can change the Network dialog box settings. Other users have read-only access to
the settings.
Using the on-board Web interface (OBWI) 50