Part 1: Before You Begin - Omega i-SERIES User Manual

PART 1
BEFORE YOU BEGIN
Customer Service
If you need assistance, please call the nearest Customer Service Department, listed in
this manual.
Manuals, Software
The latest Operation and Communication Manual as well as free configuration software
and ActiveX controls are available from the website listed in this manual or on the
CD-ROM enclosed with your shipment.
Communication Menu
The Communication menu only appears with devices purchased with the RS-232C /
RS-485 Serial Communications Option. Purchasing the controller with Serial
Communications permits a controller to be connected directly to the PC's available COM
port. Device can be configured or monitored from an IBM PC compatible computer using
software available on our CD or on our website.
To Disable Outputs
Standby Mode is useful during setup of the controller or when maintenance of the
system is necessary. When the controller is in standby, it remains in the ready condition
but all outputs are disabled. This allows the system to remain powered and ready to go.
1. When the controller is in "RUN" Mode, push d twice to disable all outputs and
alarms. It is now in "STANDBY" Mode.
2. Push d once more to resume "RUN" Mode.
PUSH d TWICE to disable the system during an EMERGENCY.
To Reset the Meter
1. When the controller is in the "MENU" Mode, push c down button once to direct
controller one step backward of the top menu item.
2. Push c twice to reset controller, prior to resuming "Run" Mode except after
"Setpoints" and "Alarms" that will go to the "Run" Mode without resetting the
controller.
2