User Manual
2.5 Sleep operation
The SLEEP function is used to decrease energy use while you sleep (and don't need
the same temperature settings to stay comfortable). This function can only be
activated via remote control.
Press the SLEEP button when you are ready to go to sleep. When in COOL mode,
the unit will increase the temperature by 1°C (2°F) after 1 hour, and will increase an
additional 1°C (2°F) after another hour. When in HEAT mode, the unit will decrease
the temperature by 1°C (2°F) after 1 hour, and will decrease an additional 1°C (2°F)
after another hour.
It will hold the new temperature for 7 hours, then the unit will turn off automatically.
The SLEEP function is not available in FAN or DRY mode.
temperature
Figure 4
Bosch Thermotechnology Corp. | 01.2017
SLEEP Operation
+/- 1 C/2 F
Set
1hr
Saving energy during sleep
Saving energy during sleep
Bosch Split Type Ductless Air Conditioner / Heat Pump | 9
+/- 1 C/2 F
1hr
7 hours
timer off
Data subject to change