Listen To An External Device; Program Play Sequence - Philips AZ1837 User Manual

2
To return to normal play, press MODE repeatedly until play mode icons are no
longer displayed.
Tip
•
Shuffle play cannot be selected when you play programmed tracks.

Program play sequence

You can program up to 20 tracks in the desired sequence.
1
In stop mode, press PROG to start to program play sequence.
» [PROG] and [P01] are displayed.
»
For MP3-CDs: press
2
Press /
3
Press PROG to program the track.
» [PROG] and [P02] are displayed.
4
Repeat steps 2 to 4 to select and program all tracks.
»
When all 20 tracks are stored, no more tracks can be
selected and the display shows [FUL].
5
To play program, press
•
In stop mode, press and hold
6
To delete program, press
» [CLr]is displayed.

Listen to an external device

You can use this unit to play audio from an external device.
1
Connect the MP3 link cable to
•
the MP3-LINK jack (3.5 mm) on the back of this unit
•
the audio output jack of the external device.
»
This unit stops the current playback and starts to play the
audio input from the external device.
16 EN
- ALBUM + to select an album.
to select a track.
.
in stop mode.
PROG to browse programmed tracks.