Cleaning The Paper Path; Ink Tube Flushing - Epson WF-BM4590 User Manual

6. Check the printed pattern and follow the instructions on the screen to choose the number
representing the best printed pattern for each set.
• After choosing each pattern number, click Next.
• If no patterns are aligned in one or more of the sets, choose the closest one in each set and click
Realignment. Then print another alignment sheet and check it.
Note: Click Skip (where available) if you want to skip a particular alignment sheet.
7. When you are done, click Finish.
Parent topic:

Cleaning the Paper Path

If you see ink on the back of a printout, you can clean the paper path to remove any excess ink.
1. Load a few sheets of plain paper in the product.
2. Use the product control panel to make a copy, but without placing a document on the scanner glass.
3. Check the back of the ejected paper to see if it is clean.
4. Repeat as necessary until the paper comes out clean.
Parent topic:
Related topics
Copying

Ink Tube Flushing

If you still see white or dark lines or missing colors in your printouts, even after cleaning the print head
several times, you can flush the ink tubes.
Flushing the ink tubes replaces all the ink inside the tubes, so flush the ink only if you cannot improve
print quality by cleaning the print head several times.
Caution: Flushing the ink tubes consumes a lot of ink and reduces the service life of the maintenance
box.
Flushing the Ink Tubes Using the Product Software
Parent topic:
Print Head Alignment
Adjusting Print Quality
Adjusting Print Quality
149