Cleaning The Print Head Using The Product Software - Epson WF-BM4590 User Manual

When the cleaning cycle is finished, you see this screen:
7. Select Nozzle Check and press the OK button.
8. Press either of the
If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours. Then
try cleaning the print head again. If quality still does not improve, the ink may be old and needs to be
replaced.
Parent topic:
Related topics
Replacing Ink and Maintenance Boxes

Cleaning the Print Head Using the Product Software

You can clean the print head using a utility on your Windows computer.
1. Load a few sheets of plain paper in the product.
2. Right-click the product icon in the Windows taskbar.
3. Select Head Cleaning.
4. Select the cleaning cycle you want to run, based on the nozzle check pattern.
5. Click Start to begin the cleaning cycle.
The light flashes throughout the cleaning cycle and stays on when the cleaning cycle is finished.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
Start buttons to confirm that the print head is clean.
Print Head Cleaning
144