Mounting The Boiler And Making Connections; Removing The Front Panel And Mounting The Boiler; Fitting The Connections On The Water Side - Viessmann VITODENS 111-W Installation And Service Instructions Manual

Mounting the boiler and making connections

Removing the front panel and mounting the boiler

Note
When mounting on the wall, observe the following: Weight excl. packaging: approx. 65 kg.
2.
Fig. 4
1. Undo the screws on the underside of the boiler; do
not remove them completely.
2. Remove the front panel.

Fitting the connections on the water side

For installation of fittings on the heating water
side and DHW side, see separate installation
instructions.
3.
1.
2x
3. Hook the boiler into the wall mounting bracket.
!
Please note
To prevent appliance damage,
connect all pipework free of load and torque
stress.
Installation sequence
11