Firmware Renewal Mode (Network Update) - Marantz bd7004 Service Manual

10. FIRMWARE RENEWAL MODE (Network Update)

FIRMWARE RENEWAL MODE (Network Update)
1. Press [SETUP] button on the remote control unit in
stop mode.
} O
2. Use [ / ] button to select "CUSTOM", then
press [ENTER] button.
} O
3. Use [ / ] button to select "Other", then press
[ENTER] button.
X Y
4. Use [ / ] button to select "Network Update",
then press [ENTER] button.
Confirmation message will appear.
X Y
5. Use [ / ] button to select "Yes", then press
[ENTER] button.
This unit will start checking for the latest firmware
version.
NOTE:
If any error message concerning the network
environment appears, please confirm the
setting of your unit according to the error
message. If you need to change any of your
network environmental setting in order to
execute the update, please contact to the
internet service provider.
6. Confirmation message will appear.
X Y
Use [ / ] button to select "Yes", then press
[ENTER] button.
The unit will start downloading the latest firmware
version.
7. When the download completes, confirmation
message will appear.
Press [ENTER] button.
The unit will start updating the firmware version.
It may take a while to complete the updating.
(Please wait until "100%" appears on the front
panel display.)
8. After updating finishes, this unit will restart and
open the disc tray automatically.
How to Verify the Firmware Version
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order.
Fig. j appears on the screen.
Version Info
F/W Name
Version
Region
EEPROM CLEAR <STOP>
4. To exit this mode, press [POWER OFF] button.
20
1-7-3
" ******* " differ depending on the models.
: *******
: *.***
: *-*
EXIT <POWER>
Fig. j
E5LB0FW