Table of Contents
Advertisement
The telephone establishes a connection to the Internet and downloads all data
required for the VoIP connection, i.e., the general provider information and your
personal provider data (account data) are saved to your base.
If you have already entered details on the Web page, this is deleted as soon as Start
Auto Configuration is selected. The fields in the Personal Provider Data and Gen-
eral data of your service provider areas and the server addresses in the Network
data for your service provider area are overwritten by the downloaded data.
Generally, you should not have to enter any additional data on this Web page.
Please note
If the message Download of settings not possible! File is corrupt! appears, no
data will be loaded onto the phone. Possible causes of this are:
u
The incorrect code has been entered (e.g., upper/lower case rules have not
been followed). If necessary, enter the code again.
u
The file that has been downloaded is invalid. Please consult your VoIP
provider.
When the download is complete, the Connections list will be displayed.
¤
Activate the connection as described on
You can then be reached on the corresponding VoIP phone number.
Profile Download area
Prerequisite: You must have received account data from your VoIP provider
(e.g., Authentication name, Authentication password).
Profile files of the most important VoIP providers are available to download on the
Gigaset configuration server. The address for the server is stored in your phone
¢
(
page
To load the data onto your telephone, proceed as follows:
¤
Select Select VoIP Provider in the Profile Download area. This will display infor-
mation on the download procedure.
Please note
If you select the Select VoIP Provider button, any changes that have been made
to the Web page will be saved and checked. Values may need to be corrected
before the Select VoIP Provider operation is started.
The download procedure consists of several steps:
¤
Select the Next button.
¤
From the list, select the country for which the list of VoIP providers is to be
loaded.
¤
Select the Next button.
¤
Select your VoIP provider from the list.
If your provider is not included in the list, select Other Provider. In this case you
will have to enter the general provider data by hand (see
service provider
below).
24
64).
area" and
page
29.
"Area: Network data for your service
"General data of your
provider"
Advertisement
Table of Contents
