Setting The Fixed Line Network Connection - Gigaset DX800 Setting Up

Hide thumbs Also See for DX800:

Table of Contents

Active (only for VoIP connections and Gigaset.net connection)

You can use the option in the Active column to activate (

VoIP connections. If a connection is deactivated, the phone will not register for

this connection. The connection can be activated/deactivated by clicking

directly on the option. The change does not need to be saved.

To configure a connection or to change the configuration of a connection:

Select the Edit button next to the connection.

Setting the fixed line network connection

Open the Settings

Select Edit in the Fixed Line Connection area.

Connection Name or Number

You can define a name for your telephone connection, which replaces the

default name Fixed Line in displays or lists. Enter a name of up to 16 characters

or the phone number of your fixed line network connection.

Dialling mode

The following dialling modes can be selected:

Pulse dial

Pulse dialling mode (PD) is used only for a few old PABXs.

DTMF

Tone dialling (DTMF) is now the most common dialling mode.

Recall

Your phone comes preset with a flash for general operation of the phone on the

main connection. The flash specifies the duration of the line interruption used

to send control signals to the exchange or the telecommunications system

(transfer (ECT), setting up a consultation call, etc.). For operation on a PABX, you

may have to change this value. Please refer to the user guide for your PABX.

Select the required flash from the list.

Select Set to save your settings.

Or:

Click the Cancel button to reject the changes you have made.

This returns you to the list of connections.

Telephony

Connections Web page.

) and deactivate (

)

Table of Contents