Technical Data - Husqvarna 226HD60S Operator's Manual

Technical data

Technical data
Engine
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, litre
Weight
Weight without fuel and grease, kg
Noise emissions
(see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Sound levels
(see note 2)
Equivalent sound pressure level at the operator's ear,
measured according to EN ISO 10517, dB(A):
Vibration levels
(see note 3)
Equivalent vibration levels (a
measured according to EN ISO 10517, m/s
Front/rear handles:
Blades
Type
Length, mm
Pitch, mm
Gear ratio
Note 1 Noise emissions in the environment measured as sound power (L
EC. Reported sound power level for the machine has been measured with the original cutting attachment that gives the
highest level. The difference between guaranteed and measured sound power is that the guaranteed sound power also
includes dispersion in the measurement result and the variations between different machines of the same model
according to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard
deviation) of 1 dB (A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
20 – English
TECHNICAL DATA
3
dB (A)
WA
) at handles,
hv,eq
2
226HD60S 226HD75S
23,6 23,6
34,0 34,0
26 26
3000±200 3000±200
0,85/8500 0,85/8500
No No
Yes Yes
NGK CMR7H-10 NGK CMR7H-10
0,9-1,0 0,9-1,0
Walbro, Diaphragm Walbro, Diaphragm
0,47 0,47
5,8 6,0
100 100
102 102
91 91
2,0/2,1<2,5 3,6/5,4
Double sided Double sided
600 750
35 35
5.11 5.11
) in conformity with EC directive 2000/14/
WA
2
.