Dip Switches - D-Link DGS-1024D G2 User Manual

Section 5 - DIP Switches
The DIP Switches on the front panel allow easy configuration of the advanced features of the DGS-1016D and DGS-1024D.
DIP Switch
EEE
Flow Control
Port Isolation
and Storm
Control
Note: The switch must be power cycled after changing DIP Switch settings for new settings to take effect.
D-Link DGS-1016D/DGS-1024D User Manual

DIP Switches

Function Description
Enable/Disable Energy-Efficient Ethernet (EEE) Feature
Enable/Disable Flow Control Feature
When enabled a broadcast storm control threshold value of 128kbps will be
applied to incoming broadcast packets on all ports.
Port Isolation:
DGS-1016D - When enabled, ports 1 to 15 will be isolated from each other,
but will still be able to communicate with port 16. Port 16 will be able to
communicate with all the ports available on this switch.
DGS-1024D - When enabled, ports 1 to 23 will be isolated from each other,
but will still be able to communicate with port 24. Port 24 will be able to
communicate with all the ports available on this switch.
Default
Off
On
Off
26