Hardware Installation; Step 1 - Before Connecting To The Network - D-Link DGS-1024D G2 User Manual

Section 3 - Hardware Installation
This chapter provides unpacking and installation information for the D-Link DGS-1016D/DGS-1024D Gigabit Ethernet Switch.

Step 1 - Before Connecting to the Network

The site where the switch is installed may greatly affect its performance. For the switch to perform safely at its optimal level,
please select a site which meets the following requirements:
1. Install the DGS-1016D / DGS-1024D in a fairly cool and dry place. See Technical Specifications page in the manual for the
acceptable operation temperature and humidity ranges.
2. Install the switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust, and direct
exposure to sunlight.
3. Leave at least 10cm of space around the switch for ventilation.
4. Place the switch within 1.82 meters (6 feet) of a power outlet.
D-Link DGS-1016D/DGS-1024D User Manual

Hardware Installation

13