Rack Installation - D-Link DGS-1024D G2 User Manual

Section 3 - Hardware Installation

Rack Installation

The DGS-1016D/1024D can easily be mounted in an EIA standard size 19-inch rack which can be placed in a wiring closet with
other equipment. If opting for a rack installation, make sure that the front panel is exposed in order to view the LEDs.
To install, attach the mounting brackets provided for this purpose to the switch's side panels (one on each side) and secure
them with the screws provided. Please note that these brackets are not designed for palm size switches.
Attach the mounting brackets to the switch
D-Link DGS-1016D/DGS-1024D User Manual 15