Table of Contents
Advertisement
10. Service - Programm
10.3The configuration - Program
1.
Activate service - program
2.
Turn the rotary switch clockwise to the position delicate spin.
If the mainelectronic has to be changed you have to configurate the spare part electronic
A code with 16 digits has to be stored. This code sets the variante of the machine.
Caution:
Don't use the LED's to configurate if there is a multidisplay, because this variante
has 7 LED's. Appliances without multidisplay have 8 LED's, which you then have to
use to configurate the electronic board.
A
=
The first digit of the display (if present), or the first 4 program duration LED's
show the binary code of the position in which the value has to be stored.
To check the several positions press the option button „Soaking".
B
=
The last digit of the display (if present), or the last 4 program duration LED's
show the configuration digit as binary code which has to be stored in the according position.
To change the value press the „prewash" button.
Store the configuration code:
After the input of the configuration code, you have to store it in the memory.
Press the „prewash" and the „soaking" button at the same time until the LED's are blinking.
Binary codes:
With this table you are able to convert the binary code, shown by the LED's, into the according number.
LED off
LED on
TSE-N 01.2000 R.K.
- 31 -
599 50 07-53/0
Advertisement
Table of Contents
