Advertisement
CONTROL PANEL
4
F Display
G TOAST COLOR TIME dial
H START/STOP button
I Red on light
L Cavity temperature
check button
M TEMPERATURE PIZZA SIZE
SLICES TRAY dial
N Frozen option button
O FUNCTION selection dial
1. Check the appliance has not suffered any
damage in transit. Place on a flat, stable
surface away from children.
2. Initial start up operation may result in minimal
smell and smoke (about 15 mins.) This is
completely normal due to the protective
substance on the heating elements.
3. To set the clock: Press the START/STOP
button for at least 5 seconds until the hour
number flashes. Set the required hour by
turning the TOAST COLOR TIME dial.
Press the START STOP button. The minutes
will flash. Set the required minutes by
turning the TOAST COLOR TIME dial.
Press the START STOP button. The new time
will display.
4. Press any button or turn any dial to turn the
oven on. The default function BAKE and
any modifiable values will flash.
5. Turn the FUNCTION dial until desired
function is highlighted on the LCD screen
6. Turn the TEMPERATURE PIZZA SIZE SLICES
TRAY dial to set the temperature if needed.
The display will not show the temperature
if it is a preset function.
PREPARING THE OVEN
7. Turn the TOAST COLOR TIME dial to set
the timer if needed. In the PIZZA function,
time will depend on size of pizza.
8. Press the START STOP button to start
cooking.
9. The red ON light (I), that is located around
the edge of the START/STOP button (H),
turns on. When the timer expires, the
display shows "End" and emits a acoustic
signal (three 'beeps'). Press any button
(H L N) or turn any dial (G M O) to reset
the oven.
10. During the cooking process you can pause
the oven by pressing the START/STOP
button (H). The red ON light (I) that is
located around the edge of the START/
STOP button (H) starts to blink. Within
5 minutes, press the START/STOP button
(H) to resume the cooking program,
otherwise the oven turns off.
1 1. It is possible to interrupt the cooking
process at any time by pressing for
1 second START/STOP button (H). The
oven goes into stand-by condition.
T IP: In BAKE and CONVECTION function is
possible to check the cavity temperature by
pressing the cavity temperature button (L).
The temperature is displayed for 5 seconds.
EO241250M
5
Advertisement
