Suzuki gw250F Owner's Manual page 95

REAR TURN SIGNAL LIGHT
To replace the rear turn signal light
bulb, follow these directions.
1. Remove the screw 1 and take off
the lens.
2. Remove the screws 2 and take
off the socket.
3. Push in on the bulb, twisting it to
the left, and pull it out.
4. To fit the replacement bulb, push it
in and twist it to the right while
pushing.
NOTICE
Overtightening the screws when
reinstalling the lens may cause
the lens to crack.
Tighten the screws only until they
are snug.
6-45