Time From Cs On To Send Start <Bfm #20; Time From Completion Of Actual Send To Rs Off (Completion Flag On) <Bfm #21 - Mitsubishi Electric MELSEC FX Series User Manual

FX communication
10.2.15 Time from CS ON to Send Start <BFM #20>
Set value:
The time after the clear to send (CS) signal is turned on until the 232IF starts the send operation
can be set.
When "control line not used" is specified, the time after the send command is given until the send
operation is started is specified.
Set BFM #20 when it is required by a modem, etc.
10.2.16 Time from Completion of Actual Send to RS OFF (completion flag ON) <BFM #21>
Set value:
The time after the 232IF sends the data until the RS signal is turned off and the send completion
flag (BFM #28 b0) is turned on can be specified.
Set BFM #21 when it is required by a modem, etc.
0 to 32,767 (x 10ms)
The initial value is 0 ms.
0 to 32,767 (x 10ms)
The initial value is 0 ms.
FX -232IF 10
2N
10-12