Craftsman 320.39596 Operator's Manual page 15

DUST
BOX
(Fig. 7)
_WARNING = Do not use the
dust box when sanding metal.
Using the dust box when sanding
metal creates a fire hazard, which
could damage the tool and lead to
serious personal injury.
Your belt sander is supplied with
a dust box to help you keep the
working area clean. The dust box
is ideal for smaller jobs.
To install=
1. Disconnect the sander from
the power source.
2. Align the rib on the
dust-exhaust port with the
groove on the dust box.
3. Slide the dust box onto the
port as far as possible.
Fig. 7
Dust Box
Dust-exhaust port
Groove
NOTICE: From time to time, clean the dust=exhaust port with a dry brush.
TO remove:
1. Disconnect the sander from the power source.
2. Grip the dust box firmly, and pull it out from the tool.
NOTICE: For Bonger periods of use, or on Barge pieces of work, it is advisable to
use a suitable vacuum cleaner. Attach a 1=1/4 in. wet/dry=vacuum hose to the
dust=exhaust port. it is advisable to also wear a suitable dust mask, as there
may be residual airborne dust particles in the area.
,_ WARNING: The dust that is produced while sanding can be detrimental
to health, flammable, or explosive. Suitable safety measures are required.
Examples: Some types of dust are known to cause cancer. Always wear a dust
mask and use the proper dust collection method: dust box for small volumes
and vacuum connection for large volume dust collection.
15