Craftsman 320.39596 Operator's Manual page 11

LED WORKLIGHT
The LED worklight, located below the front handle, illuminates when the trigger
switch is depressed. This feature provides extra light for increased visibility.
2=POSITION BELT COVER
Raise the cover when sanding in the narrow areas to improve accessibility to
narrow areas.
LIVE=TOOL INDICATOR LIGHT
The live=tool indicator light is located on the rear of the tool, where the power
cord enters. This green light is always illuminated when the sander is plugged
into a power source.
A
J"L WARNING: If any parts are broken or missing, do not attempt to attach the
sander to a power outlet or operate the sander until the broken or missing parts
are replaced. Failure to do so could result in possible serious injury.
,_1_ WARNING: Do not attempt to modify this belt sander or create accessories
not recommended for use with this belt sander. Any such alteration or
modification is misuse and could result in a hazardous condition leading to
possible serious injury.
_, WARNING: To prevent accidental starting that could cause serious personal
injury, always disconnect the tool from the power source when assembling
parts, making adjustments, installing or removing belt, cleaning, or when it is not
in use.
UNPACKING
• Carefully remove the tool and any accessories from the carton. Make sure
that all items listed in the packing list are included.
Inspect the tool carefully to make sure that no breakage or damage
occurred during shipping.
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
If any parts are damaged or missing, please return the tool to the place
of purchase.
PACKING LIST
Belt sander, sanding belt (120 grit), dust box and operator's manual
ii