Disassembly Of Lcd Ass'y - Canon PowerShot G11 Service Manual

3.6 Disassembly of LCD ASS'Y

(1) Turn the HINGE UNIT, renove four screws (d × 4), and then detach the LCD REAR COVER.
(2) Peel off the DOUBLE-SIDED TAPE and open the LCD INSULATION SHEET.
(3) Remove one screw (e × 1), disconnect the CN4303, and then detach the HINGE UNIT.
Note: Since the CN4303 has a peculiar shape, detach the connector as shown below.
(1) - d
(1) - d
LCD REAR COVER
Note
CN4303
Insert the fine tip of a tool (such as tweezers) into the pull-out holes to pull out the connector by
alternatively moving the right and left sides little by little.
(3) - e
(3)
(1)
(1)
HINGE UNIT
LCD INSULATION
SHEET
(1) - d
Pull it out in the
arrow direction.
Pull-out holes
13
CN4303
(3)
(2)
(1) - d
DOUBLE-SIDED
TAPE
d
CD4-3835-000
3.0mm
BLACK
M1.4
(NK GRIP)
Do not pull the connector
by the cable as this may
break the cable or
damage the connector.
e
CD3-0680-000
2.0mm
SILVER
M1.4