Separation Of Rear Cover Ass'y - Canon PowerShot G11 Service Manual

3.3 Separation of REAR COVER ASS'Y

(1) Remove four screws (a × 2, b × 2).
(2) Open the LCD, disengage the claw, and then detach the REAR COVER ASS'Y.
Note: Since the REAR COVER ASS'Y is connected to the CN1008 with the FPC, be careful not to cut the FPC.
(3) Disconnect the CN1008 and separate the REAR COVER ASS'Y.
<Note on Reassembling>
(1) Attach the REAR COVER ASS'Y as shown in the figure below.
REAR COVER ASS'Y
(1) - b
(1) - a
Note
REAR COVER
ASS'Y
CN1008
Be careful not to
cut the FPC.
Lift up the bottom part of the LCD side, disengage the claw,
and then detach the REAR COVER ASS'Y.
LCD
(2)
(2)
REAR COVER ASS'Y
BOTTOM
SIDE
Claw
8
(3)
CN1008
Note on Reassembling (1)
LCD
Fold the FPC as shown in the
figure above, and attach the
REAR COVER ASS'Y.
a
CD4-3837-000
3.5mm
BLACK
M1.7
(NK GRIP)
Claw
(1) - b
REAR COVER ASS'Y
CN1008
b
CD4-3836-000
5.5mm
BLACK
M1.7
(SELF TAP)