Separation Of Top/Mic Cover Ass'y - Canon PowerShot G11 Service Manual

3.9 Separation of TOP/MIC COVER ASS'Y

(1) Remove four screws (g × 3, h × 1), disengage the dowel, disconnect the CN4001 (B to B) and CN4503, and then detach
the TOP/MIC COVER ASS'Y.
(2) Detach the PLATE SPRING.
(3) Remove four screws (j × 4) and detach the ACCESSORY SHOE.
ACCESSORY SHOE
PLATE SPRING
Dowel
(1) - g
(3) - j
(2)
(1) - g
(3)
(1)
(1)
(1)
CN4503
CN4001 (B to B)
(2)
: Apply ethanol
PLATE SPRING
Tweezers
Since DIABOND has been applied
to the back side of the PLATE
SPRING apply ethanol to the
PLATE SPRING so that ethanol
soaks DIABOND to facilitate the
removal of the PLATE SPRING.
TOP/MIC COVER ASS'Y
(1) - h
18
STEP 2
Draw out.
STEP 1
Detach
g
XA1-7170-257
2.5mm
SILVER
M1.7
h
XA4-9170-407
4.0mm
SILVER
M1.7
(SELF TAP)
j
XA1-3170-407
4.0mm
SILVER
M1.7