Rear Cover Unit - Canon PowerShot A300 Service Manual

CHAPTER 3. REPAIR INSTRUCTION
SIDE COVER
BATTERY COVER
b
(1)-3
LENS COVER
CAUTION
a
CD3-0443-000 XA4-9170-607
4.0mm
SILVER
M1.7
(SELF TAP)
(SELF TAP)

2.2 REAR COVER UNIT

(1) REAR COVER UNIT
CAUTION
Before starting the removal, check that the LENS COVER is closed.
1. Remove the Lithium battery.
2. Remove the four screws of a.
Remove a single screw by rotating the CONNECTOR COVER in the direction of the arrow.
3. Remove the four screws of b by opening the SIDE COVER and the BATTERY COVER in the direction of
the arrow.
4. Open the REAR COVER UNIT in the direction of the arrow. Remove connection of the LCD FPC and the
MO FPC, and remove the REAR COVER UNIT. Remove the SIDE COVER at the same time.
NOTE1 (Assembling)
During assembling, check that the switch position is correct.
NOTE2 (Assembling)
During assembling, set the position of the REAR COVER UNIT.
(1)-3
NOTE1 (Assembling)
Switch position check
b
6.0mm
a
(1)-2
METAL
M1.7
Fig. 3-4 REAR COVER UNIT
(1)-4
SIDE COVER
(1)-4
REAR COVER UNIT
b
Setting position during assembling
(1)-3
(1)-2
a
LCD FPC
a
(1)-2
(1)-2
(1)-2
CONNECTOR
COVER
3-4
NOTE2 (Assembling)
(1)-1
LITHIUM BATTERY
(1)-1
(1)-4
a
(1)-2
MO FPC
REAR COVER
UNIT
(1)-4