Toshiba TDP-P75 Service Manual page 34

TDP-P75 Service Manual
Temperature #1: Lamp box temperature.
Temperature #2: Front sensor.
Temperature #3: No use.
Fan1-RPM: Blower fan actual speed.
Fan2-RPM: Power fan actual speed.
Fan3-RPM: DMD fan actual speed.
Fan1-Blower Target: Blower fan speed setting which controlled by program.
Fan2-Power Target: Power fan speed setting which controlled by program.
Fan3-DMD Target: DMD fan speed setting which controlled by program.
Manual fan speed: Set the fan speed manually for testing purpose.
Burn-In On Minute: Turn the projector on for X minutes.
Burn-In Off Minute: Turn the projector off for X minutes then turn it on again.
Burn-In Cycle Time: Cycle time for turning the projector on and off.
Normal burn in hour: Normal burn in time.
Burn-in: Switch the burn-in mode.
Life time burn-in: Project life time testing. Switch the projector on until it shouts down
automatically.
Toshiba Version: Display projector model name, firmware version, type.
33/60
08/19/05