Printing Event Log - Kyocera ECOSYS P7035cdn Service Manual

(3) Printing a event log (EVENT LOG)
Service items
Printing an event log
(EVENT LOG)
Printing an event log (EVENT LOG)
Description
Prints a history list of occurrences of paper jam, self-diagnostics, toner replacements, etc.
Purpose
To allow machine malfunction analysis based on the frequency of paper misfeeds, self diag-
nostic errors and replacements.
Procedure
1. Connect the USB or network cable between printer and PC (network).
2. Connect the power cord.
3. Turn printer power on. Make sure the printer is ready.
4. Send the following PRESCRIBE command sequence from the PC to the printer.
!R!KCFG"ELOG";EXIT;
A sheet of event log will be printed.
Completion
Remarks: Details of configurations (See above 4.)
Notes on Connecting to USB
(1) Save the Prescribe commands above as a text file in the PC.
(2) Select the Sharing tab of the printer properties and share the printer.
(3) Select a USB port in the Port tab. (Specify the printer name for sharing.)
(4) From the DOS Prompt, execute the following command line:
copy file-name\\computer-name\shared-printe
File-name should be the name of the file that was saved in step 1.
Notes on connecting via network (using FTP protocol)
(1) Save the Prescribe commands above as a text file in the PC.
(2) From the DOS Prompt, execute the following command line:
ftp printer-IP-address
Do not specify user name and password.
(3) From the DOS Prompt, execute the following command:
put file-name
File-name should be the name of the file that was saved in step 1.
Description
USB interface
Network interface
Power cord
Figure 1-3-5
1-3-12
USB cable
Network cable
2PR