Product Description - CO/Tech PLCD25 Instruction Manual

2. Product description

1
1. Charging station
2. Mains adaptor
3. Quick chuck
4. Torque setting ring
5. Gear selector (low/high)
6. Forward/reverse selector
7. Power trigger
8. Screwdriver bits
9. Battery release tab
10. Rechargeable battery
3. Charging
N.B. The mains charger is only intended for indoor use.
• Press in the two battery release tabs (9) and remove the battery from the drill/driver.
• Plug the mains adaptor (2) into a wall socket and connect the lead to
the charging station (1).
• Place the battery into the charging station and push it down as far as it will go.
The green LED will come on if the battery is correctly inserted, the mains adaptor
is connected and the battery has begun charging.
• Charge the battery for 3-5 hours and then remove the battery from
the charging station. Unplug the mains adaptor to turn the charger off.
N.B. The charger does not have an automatic shut-off.
3
2
6
7
8
9
10
7
4 5