Removing the rear-I/O cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Prerequisites
Remove the
base
Procedure
1
Remove the two screws (M2.5x7) that secure the rear-I/O cover to the palm-
rest assembly.
2
Using a plastic scribe, gently release the tabs that secure rear-I/O cover to
the computer base.
36
computer. After working inside your
cover.
After working inside your
computer.